|
|
 |
ITC-6614-DSL
The ITC-6614 Check Mate is a partner for your butt set. It
provides audible and verbal reports of:
- Line Voltage (0-165VDC)
- Loop Current (0-125 mA)
- Over Voltage (>165 VDC)
- Over Current (>125 mA)
- % Battery power remaining.
The ITC-6614 Check Mate prevents interference with high speed
transmission circuits. The override feature allows use on circuits
with both voice and data.
THIS MATE TALKS TO YOU!
- Data protection at a level superior to test sets with
built-in Data Protection
- Conversion adjunct attached "in-line" to any Industry
standard Butt-Set.
- Field Installed in 15 minutes using only a screw driver.
- When the presence of data is detected the Butt-Set emits a
tone and locks out the test set.
- Built in warble toner for wire tracing.
- No more accidental corruption of data
- Protection does not intrude into the voice band
- Data defender detects numerous xDSL protocols, IDSN (BRI/PRI),
T1, E1, ADSL, SW56, 64 KB, HDSL, S-HDSL, US DSL, RADSL, and VDSL.
- An override feature is available for circuits with both data
and voice service.
- Save the cost of a new data safe Butt- Set. The Data
Defender does the job for less than 1/5 the cost.
Payphone providers use Check-Mate to
determine if the central office line (Coin or B1) will operate their
pay phone correctly!
General Specifications
| Case Composition: |
High Impact ABS-765 Plastic |
| Weight: |
4.5 oz. Typical |
| Overall Size: |
1.75"W x 5.00"H x 1.57" |
| Battery Type: |
Standard 9V |
| Battery Life: |
30 Hours "On-Line" |
| Operating Temperature: |
-200 C to 600 C |
| Storage Temperature: |
-400 C to 700 C |
| Humidity: |
5% to 95%, Non-Condensing |
| Basic Sensitivity Threshold will be less than: |
200mV |
|
 |
|
 Products
|
|
|
 |
